MotoSAT J1 User And Installation Manual page 52

Import/Export Files
Import/Export Files
The J1 Satellite Antenna Controller is capable of exporting and importing both
Configuration and Satellite Table files.
This feature allows the installer a faster way to configure and complete a system
installation. By importing a configuration with the same Dish Mount type and making
small modifications to Network and Search settings the controller can be ready for a
Testdish in minutes.
Configuration Files
Configuration Files contain the specific parameters of the J1 Controller which include IP
Address, Modem, RF hardware, Satellite and Polarization, and Dish Mount settings.
To Import Configuration File click on the Browse command to the right of the dialog
box. Select the location and file name of the corrected configuration file (filename.txt)
making sure it has a .txt extension. Then click on the Import Configuration File
command.
Note: If any Network IP settings are changed in the imported configuration file the J1
controller will automatically reset to restart the Ethernet connection to allow the IP
settings to initiate.
52