Mount Settings - MotoSAT J1 User And Installation Manual

Mount Settings Page
The Mount Settings Page allows the user to make adjustments the Mount Stowed
Position, Skew Offsets, and even basic motor operation parameters.
WARNING! Making adjustments to any mount configuration settings can cause the
system to not function properly. Any adjustments to these setting should be performed
under the supervision of a certified MotoSAT installer or through MotoSAT Technical
Support. Technical Support 1-800-247-7486
If you have made adjustments to any of the settings below and the dish no longer
performs a complete Calibrate Dish (Test Dish) you should perform an NVClear and run
another Calibrate Dish before contacting MotoSAT Technical Support.
Note: An NVClear will also clear other configuration settings that may need to be
reconfigured. Do not re-import a configuration file to resolve the above issue.
Each Setting is described in detail below.
36