MotoSAT J1 User And Installation Manual page 6

ModemIp = 192.168.0.1
GateAddr = 192.168.1.1
Place into J1 SD Card Slot, turn on power. When controller restarts IP Info is
changed.
See Network Settings page 19.
 Step 2
Upgrade Firmware (If necessary)
Using the SD Card, LoadOnce Folder, place a new J1firmware.hex file in the
LoadOnce folder.
Place into J1 SD Card Slot, turn on power. Wait for status indicators to scroll
from left to right. When controller restarts the new firmware is updated.
See Upgrade Firmware page 54.
 Step 3
Modify Configuration Functions
Open the HTML Browser and choose the Configuration Functions pages;
Search Settings (all) - Satellite System, Satellite Longitude, and RX Polarity
Search Settings (HNS) - TX Polarity, Modem IF Frequency, Symbol Rate
LNB Settings – As necessary
See Configuration Functions page 19.
Note: See Import/Export Files to save configuration page 52.
 Step 4
Calibrate Dish
See Calibrate Dish page 50.
 Step 5
Ready for Normal Operation (Find Satellite)
Open the HTML Browser and click on the Search command.
See Find a Satellite page 11.
 Step 6
Import a current Sat Table
Once the Dish Mount is locked to the correct satellite and the Modem has come
into the network you should update the Sat Table.
/modem IP address
/router IP address
6