MotoSAT J1 User And Installation Manual page 32

Note:
is the Default Satellite. This Satellite is configured in Search Settings
Satellite Longitude.
Satellite Selection Longitude
Satellite Selection Longitude (SSL) should be set to the approximate
center of the (Mobile) region the Dish Mount is going to be used. The
default value (95W) is for North America.
Africa 22E, Asia 120E, Australia 135E, China 105E, Europe 15E, Middle
East 45E, Siberia 75E, Russia (West) 45E, South America 60W, SE Asia
90E
Note:
Drop Down box by moving this value higher or lower.
Satellite Selection Window
The Satellite Selection Window (SSW) (in degrees) selects the total
number of Satellites that will be displayed in the Satellite Selection Drop
Down box on the System Status Page. The Window is centered on the
Satellite Selection Longitude.
Note:
identification. The window must large enough to include the Satellite
Longitude of any Satellite that is entered into Search Settings Satellite
Longitude.
Note:
Drop Down box by changing this value.
The first selection shown in the Satellite Selection Drop Down box
(95W)
You can add satellites to the East or West in the Satellite Table
(70)
Only Satellites in this window (SSW) can be selected or used for
You can add or reduce the number of satellites in the Satellite Table
32