MotoSAT J1 User And Installation Manual page 51

We recommend that one person be outside the vehicle while the test is in process to
assure that the antenna moves properly to all maximum and minimum limits as described
above.
A proper Calibrate Dish will;
 Raise Elevation approximately 145 degrees to Max Stall
 Lower Elevation to 85 degrees dish angle
 Test Elevation Peak Speed and Currents
 Rotate Skew CCW to MAX Skew Limit (facing Dish)
 Rotate Skew Clockwise to MIN Skew Limit (facing Dish)
 Move Skew (LNB) to Configured Stow Position
 Rotate Azimuth Clockwise 375 degrees (360 +15)
 Rotate Azimuth CCW 180 Degrees, test Peak Speed and Currents
 Rotate Azimuth CCW to Stow Position
 Lower Elevation to Stowed Position
 End of test
Calibrate Dish Screen
If at any time the Dish stops the Calibrate Dish has failed. The System Status Screen will
display Error message. Contact Technical Support for assistance.
Calibrate Dish Screen
If the Calibrate Dish completed properly the system is ready for Normal Operation.
In process
Completed
51