MotoSAT J1 User And Installation Manual page 47

Azimuth Count Resolution
The Azimuth Count Resolution (AzCountResolution) displays the actual counts
per degree of the Dish Mount.
All MotoSAT Dish Mounts use some type of position counters to determine the
actual location of the mount relative to the Stowed position. Each mount and
every motor (AZ, EL, SK) output different numbers of counts per degree.
To make this information usable the counts are converted to degrees as a standard
frame of reference.
Even though a user could change the counts per degree value in telnet it is not
recommended. These values will not change unless MotoSAT makes physical
changes to the Dish Mount.
Making adjustments to this setting without the direction of MotoSAT Technical
Support could cause the system to not function properly or even damage to the
Dish Mount.
Elevation and Skew Settings
Like Azimuth settings described above, the Elevation and Skew settings are
configured similarly. Every Dish Mount has default settings for each of the fields
shown below and it is recommended to not make any changes to these settings
without instruction from MotoSAT Technical Support.
Making adjustments to this setting without the direction of MotoSAT Technical
Support could cause the system to not function properly or even damage to the
Dish Mount.
Dish Light
Enabled
Under normal use when the Dish Light is Enabled the DataStorm Dish
will have a glowing Blue reflection off of the Dish surface when the dish
is deployed. When the Dish is stowed this light will be off.
Disabled
If the user chooses to have this light off all the time simply disable this
feature.
Call MotoSAT
Call MotoSAT
(Enabled)
47