Diagnostics; Controller Startup Test - MotoSAT J1 User And Installation Manual

Diagnostics

Firmware Version 1.0.0

Controller Startup test

J1 Controller Status Indicators
Power up Test. This test will determine that the main power up sequence is
operating properly.
No Modem Connected in Generic Mode.
Antenna in stowed position.
Use windows Desktop Clock as the timer.
Start Test
Turn on AC Power Switch on right side of controller.
 Switch will illuminate a Burnt Orange Color.
Wait for Windows clock to start at the 0 Second (12 O'clock position)
Start!
Seconds
0 Press Power button on Left side of J1 Controller.
0 ON light illuminates.
0 LAN, GPS, Ready, Busy, and Stow lights illuminate
1 LAN, GPS, Ready, Busy, and Stow lights Off
2-5 LAN flashes Delay Time
13 LAN and Stow light illuminates
18 LNB light illuminates
55 GPS light On solid (Lock minimum time)
180 GPS light On solid (Lock maximum time)

Busy LED may flicker occasionally
 If GPS Antenna does not have 360degree view of sky times may differ.
 Times from 12 to 180 seconds have a +/- 3 second tolerance.
End Test.
Action
64