MotoSAT J1 User And Installation Manual page 21

Web Sat Table URL
The J1 Satellite Antenna Controller is capable of downloading and
upgrading the internal current Satellite Table directly from a website.
http://www.motosat.com/sattables/world.csv
address to receive current Sat Table updates. If there are other sites that
offer compatible Sat Tables you can enter that address in this location.
In addition to world.csv which is the current worldwide Satellite Table in
time MotoSAT may offer other CSV (comma separated value files) for
specific locations in the world.
Startup Delay
Startup Delay sets a time delay from J1 Power On to active LAN
connection. This time period is displayed in seconds (0 to 999). This time
delay is used to allow the Router and or Modem time to configure
properly and communicate after AC power has been applied to these
devices. The J1 will attempt to communicate with the modem after the
delay time has expired.
Example; a LinkSys Router typically requires 20 seconds before it sets
DHCP and accesses the WAN port. So setting the Startup Delay to 30
seconds should resolve this for the J1 to see the modem.
System Name
Allows users to name and manage several vehicles by identifying the J1
Controller through remote access.
(http://www.motosat.com/sattables/world.csv)
( 4 )
(MotoSAT)
is the MotoSAT default
21