Avaya IP Office 8.1 Product Description page 198

SIP Protocol: Feature overview on IP Office with 1100/1200 phones
The 1100 and 1200 Series phones are supported on IP Office using the SIP protocol, therefore the user
interface can be slightly different then when used on BCM with UNIStim. For example, on IP Office, the 1100
and 1200 Series IP phones only support a single call appearance (although multiple calls are supported).
Note that these telephones are only supported on IP Office 500/500 V2 hardware.
They support a large set of features including:
Standard phone features like hold, transfer, conference (IP Office based)
·
A single call appearance (note that currently bridged appearances and trunk-line appearances are not
·
supported)
Message waiting support
·
Busy Lamp keys with speed-dial, status indication and pickup of ringing calls
·
Application support. The telephones can be used in combination with applications like Avaya one-X™
·
Portal for IP Office for added comfort, allowing e.g. click and dial functionality.
Self labeling Feature keys: This allows access to selected IP Office features using a single key-press. If
·
additional parameters are needed, the user is guided using a dialog interface of feature request plus
softkeys for e.g. confirmation
"Special" feature key. The supported features are also available pressing a "feature" (soft-) key plus
·
the appropriate feature code. The feature codes are identical to the features codes from BCM,
therefore making transition easy and painless.
Ease of installation: The telephones can be managed from IP Office manager and are easily installed.
·
IP Office will serve as DHCP-server and can provide configuration files, software updates etc. To install
the telephones, only IP Office manager is needed.
When migrating telephones from BCM to IP Office, when IP Office DHCP server is used, the system will
·
take care of installing/upgrading the telephones to the correct software for IP Office. This makes
migration easy and quick.
With IP Office Release 8, the SIP 4.3 firmware becomes available with the following enhancements:
Removal of the requirement to press the 'Send' key in order for the phone to start dialing (1-10 sec
·
timeout - default = 5 sec)
Avaya one-X™ Portal for IP Office integration: hold/mute & conference supported
·
Language selection via IP Office Manager is now supported
·
Product Description
IP Office 8.1
© 2012 AVAYA All rights reserved.
Page 198
Issue 26.k.- (16 August 2012)