22. Technical Specifications - Avaya IP Office 8.1 Product Description

22. Technical Specifications

PC requirements and specifications of the various IP Office applications can be found in a separate document in
the IP Office section of support.avaya.com.
Dimensions
Unit Dimensions (mm/inches)
IP500 and IP500 V2
· The recommended minimum clearance, front and rear, for the connection of cables and other devices is
75mm/3".
Weight
Unit
IP500 Control Unit
IP500 V2 Control Unit
IP412 Control Unit
Analog 16 Module
DS16 Module
DS30 Module
DS16A Module
DS30A Module
TCM8
WAN3 Module
So8 Module
Phone 8 Module
Phone 16 Module
Phone 30 Module
Environmental
· 0°C to +40°C (32°F to 104°F). 95% relative humidity, non-condensing.
Call Capacity
Busy Hour Call Complete (BHCC) is a measure used to test IP Office systems under a high call load. For BHCC
tests, each incoming call rings for 5 seconds, is answered and stays connected for 6 seconds. The BHCC figures
for the different IP Office control units are listed below. Note that in some cases the BHCC figure achievable will
be limited by the number of incoming trunks supported.
· IP500 = 36000.
· IP500 V2 = 36000.
Product Description
IP Office 8.1
Width
445mmm/17.5"
Weight
3.2Kg/7.0lbs
3.2Kg/7.0lbs
3.0Kg/6.7lbs
2.9Kg/6.5lbs
3.0Kg/6.7lbs
3.5Kg/7.8lbs
3.0Kg/6.7lbs
3.5Kg/7.8lbs
0.4Kg/0.9lbs
2.8Kg/6.3lbs
2.8Kg/6.3lbs
2.8Kg/6.3lbs
2.9Kg/6.5lbs
3.1Kg/6.94lbs
© 2012 AVAYA All rights reserved.
Height Depth
73mm/2.9" 365mm/14.4"
Issue 26.k.- (16 August 2012)
Page 436