Preview Control - Qvis iBox nvr User Manual

Please refer to the following sheet for detailed information:
Parameter Function
Remote device Here you can see the searched remote device name, IP address, TCP port
information and manufacturer's name.
Channel Please select the local device channel number to connect to the remote
device. You need to highlight the enabled item to activate this function.
Now you can see remote device type, IP address, etc.
Device search Please click the Device Search button to search for all the remote devices
that are available. Please note the system can only search the devices in
the same segment and the device shall disable the firewall.
Type Select remote device type here.
Manufacturer
Includes: private, Panasonic, Sony，Dynacolor AXIS, Arecont, Samsung,
Onvif, custom, etc. For the custom mode, you can just input the URL, user
name and password to view the video. There are two modes: TCP
(default) & UDP.
Please input remote device IP address, port number, remote device,
IP address,
port, remote
channel number and account manually.
channel.
User/password Please input account to login the remote device.
Click the 'Manual add' button, you will see an interface as shown in Figure
Manual add
7-55. You can input remote device information manually.

7.4.3.9 Preview Control

Here you can set preview mode: 1/4/8/9/16-window. See
Figure 7-56.
For 16-channel series product, the preview channel ranges from channel 1 to channel 16.
For 32-channel series product, the preview channel ranges from channel 1 to channel 32.
© Copyright Qvis ®. All documentation rights reserved. 137