Default - Qvis iBox nvr User Manual

turn on window switch function. The
icon stands for 'Closing switch' function.

Monitor tour type: System supports a 1/8-window tour.

Alarm tour type: System supports a 1/8-window tour.
Please highlight the
After completing all the setups please click 'Save' button, system goes back to the previous
menu.
In Figure 5-66, click the modify button after selecting each channel. You can see an interface
shown as in Figure 5-67. Please note that all your modification on here applies to the local end
only. You need to refresh the web or the client-end to get the latest channel name. System
supports up to a maximum of 25-digital characters.

5.6.10 Default

Click default icon, system pops up a dialogue box. You can highlight the
to the default factory setup.

Select all

General

Encode

Schedule

RS232

Network

Alarm

Detect

Pan/tilt/zoom

Display

Channel name
© Copyright Qvis ®. All documentation rights reserved.
icon stands for 'Opening switch' function, the
icon to select the corresponding function.
Figure 5-67
icon to restore back
71