Printronix P8000 Series Administrator's Manual page 86

Chapter 4
QUICK SETUP Menu
Vert Forms (LG)
•
Bot Frm 66/6 (factory default). This option sets the bottom margin for the
forms. You must specify the bottom margin in lines (at 6 lines per inch),
ranging from 0 to 198 lines (33 inches). The default setting is 66. Press
the right arrow to increase the value, left arrow to decrease the value, and
ENTER to change units. Selecting a value for this option resets the top
margin to 0, so the top margin must be redefined after this option is
selected.
•
Top Mrg 6/0 This option sets the top margin for the forms. You must
specify the top margin in lines (at 6 lines per inch), ranging from 0 to 198
lines (33 inches). The default setting is 0. Press the right arrow to
increase the value, left arrow to decrease the value, and ENTER to
change units. The margins will automatically adjust so that the top and
bottom margins do not cross each other.
Horiz Forms (LG)
•
Left Mgr 0.00 (factory default). This sets the left margin for the forms.
You must specify the left margin in 1/10 inch increments, from 0 to 13.1
inches. The default value is 0. Press the right arrow to increase the value,
left arrow to decrease the value, and ENTER to change units. The
margins will automatically adjust so that the left and right margins do not
cross each other.
•
Right Mrg 13.2. This sets the right margin for the forms. You must specify
the right margin in 1/10 inch increments, from 0.1 to 13.2 inches. The
default value is 13.2. Press NEXT to increase the value, PREV to
decrease the value, and ENTER to change units. The margins will
automatically adjust so that the left and right margins do not cross each
other.
Page Length Rep (PCL-II)
•
Inches/Page (factory default). Allows the user to set the page length in
inches.
•
Lines/Page. Allows the user to set the page length in number of lines.
Max Line Width (PCL-II)
Set the maximum line width at either 13.2 inches or the maximum width of the
printer.
LPI Adjust (PCL-II)
Set the lines per inch value for the PCL-II emulation.
86