Config. Control Menu - Printronix P8000 Series Administrator's Manual

CONFIG. CONTROL Menu

The CONFIG. CONTROL menu allows you to control your printer's
configurations according to the specifications necessary for your print jobs.
CONFIG.
CONTROL
(from page 73,
74, 75, 76, 77,
78, and 79)
Load
Config.
Factory*
Cfg 1*
Cfg 1 - Cfg 8 Cfg 2 - Cfg 8
Name
Configs
(see Example Cfg 1*
2 on page 66) Cfg 2 - Cfg 8
All
Load Config.
The printer can store numerous configurations in memory. This parameter
allows you to select and load a specific configuration.
Save Config.
This option allows you to save up to eight configurations to meet different print
job requirements. This eliminates the need to change the parameter settings
for each new job. The configurations are stored in memory and will not be lost
if you turn off the printer. If the Protect Configs. parameter is enabled, the new
configuration will not be saved unless the existing configuration has been
deleted first. The factory default configuration cannot be changed. See
"Saving Your New Configuration" on page 63 for details.
Print Config.
This option is used to print a listing of various stored printer configurations.
Store printouts of your configurations in a safe place for quick referral.
OpenPrint P8000 HD Postscript/PDF Firmware
Save Print
Config.
Config.
Current Short* All*
Current Full Cfg 1 - Cfg 8
Factory
Power-Up
All
Cfg 1 - Cfg 8
Reset Cfg Auto Save
Names
Enable*
Disable
CONFIG. CONTROL Menu
* = Factory Default
Delete Power-Up
Config.
Config.
Factory* Disable*
Cfg 1 - Cfg 8 Enable
Protect
Configs.
91