Igp/Vgl Submenu - Printronix P8000 Series Administrator's Manual

Chapter 4
EMULATION Menu
Configuring the Emulation with the Control Panel
You can select VGL default parameters directly from the control panel or by
control codes as explained in the IGP/VGL Programmer's Reference Manual.
The VGL parameters are described on the following pages. Parameters
marked with an asterisk (*) indicate the default value. The printer must be
offline to enter the configuration structure.
IMPORTANT
BEFORE you reconfigure the IGP/VGL, print a configuration sheet to see
all of the current settings.
Pressing an invalid key to enter a parameter value may move you to another
level in the configuration menu or exit the menu completely.

IGP/VGL Submenu

EMULATION
(from page 111)
IGP/VGL
SFCC &
Pwrup
VGL SFCC
5E*
(11-FF hex)
Power-up ^X
Disable*
Enable
Power-up ^F
Disable*
Enable
Power-up ^PY
Disable*
Enable
Font Set
(see page 196)
186
LPI Graphics
Options
6* (see page 187)
7
8
9
10
PI Control Prt to
Emulate
Printer PI Disable*
Disable* MVP/MVP 150B
Enable L150
Host PI P3040
Disable* P6000
Enable P9000
Max PI 16
Enable*
Disable
* = Factory Default
Error Ignore/DB8
Handling
Setup
Error Msgs Ignore Chars
Enable* Disable*
Disable Char 1
Error Markers Char 2
Enable* Char 1&2
Disable Ignore Ch#1
Offpage Errors 0* (0-255)
Disable* Ignore Ch#2
Enable 0* (0-255)
Barcode Errors Data Bit 8
Enable* Enable*
Disable Disable