Setting Up The Power Stacker - Printronix P8000 Series Administrator's Manual

Appendix C
Stacker Operation

Setting Up the Power Stacker

1. Set the printer power switch to | (On).
2. If necessary, press the ONLINE key on the front panel or rear control
panel to take the printer offline. (Figure 2.)
3. Press the ELEVATOR UP key and wait for the elevator assembly to
reach the top of its travel. (Figure 2.)
344
A
/O FF
ON
E
LIN
ON
PAPER ADVANCE
ELEVATOR DOWN
Figure 2. The Rear Control Panel
ON LINE
ELEVATOR UP
A