Printronix P8000 Series Administrator's Manual page 133

KS Emulation
Printer
Protocol
KS
(from page 132)
Define CR CR Bold Select
Code
CR = CR* Enable*
CR = CR + LF Disable
Alt Set 80-9F
Control Code*
Printable
Define CR Code
The Define CR code option controls the action of the printer when it receives
a Carriage Return code (hex 0D) from the host computer. If this feature is
enabled, each time the printer receives a Carriage Return, it inserts an
additional Line Feed code (hex 0A) into the data stream. Do not use this
feature if the host computer sends Line Feeds to the printer.
•
CR = CR (factory default). Does not insert an extra Line Feed after each
Carriage Return.
•
CR = CR + LF. Inserts an extra Line Feed after each Carriage Return.
CR Bold Select
This option determines whether CR (0x0D) will turn on the bold attribute.
•
Enable (factory default). The text after CR will be printed as bold together
with the text before CR.
•
Disable. Normal CR function.
Define LF
Autowrap
Code
With LF+CR* LF = CR + LF*
With CR LF = LF
Disable
Emulation
Extend
Disable*
Enable
KS Emulation
KS Emulation
Printer Select
Disable*
Enable
133