Printronix P8000 Series Administrator's Manual page 332

Chapter 8
Fault Messages (H-Series with Numerical Prefix)
Table 2. LCD Message Troubleshooting Table (H-Series)
Can User
Displayed Message
TCP PORT BUSY Yes
1
Before contacting an authorized service representative, power off the printer, wait 15 seconds, then
power it back on and rerun your print job. If the message reappears, press CLEAR. If the fault message still
displays, then contact your authorized service representative.
332
Explanation
Correct?
Error message reported by
the Printer Manager when
ethernet interface option is
installed. The network
address given in the printer
properties was reached, but
the printer port is busy.
Solution
Refer to the Printronix P8000
Maintenance Manual.