Select Font - Printronix P7000 User Manual

Define LF (Line Feed) Code
This parameter forces the printer to insert an automatic Carriage Return code
into the data stream whenever a Line Feed code occurs. This can be used in
most installations, but it is required if the host computer does not send
carriage returns to the printer.
•
LF = LF (default). Does not perform an automatic carriage return. The
next print position will be the current print position of the next line.
•
LF = CR + LF. Performs an automatic carriage return. The next print
position will be print position 1 of the next line.
Autowrap
This parameter determines if text will wrap to the next line when the line of
text exceeds the right margin.
•
Disable (default). Truncates the text beyond the right margin until a CR or
CR + LF is received.
•
Enable. Automatically inserts a CR + LF after a full print line.
PGL SFCC
You can specify which hex code (1-255) will be used as the Special Function
Control Code (SFCC). The factory default setting is 126. The SFCC denotes
that the following data is a PGL command.
PI Slew Range
You can specify how many lines the paper will feed.
•
16 (default). A paper slew of 0-15 will move 1-16 lines.
•
15. A paper slew of 1-15 will move 1-15 lines. A paper slew of 0 will move
1 line.
CR Edit
This parameter determines if a carriage return will be followed by a line feed.
•
Disable (default). The printer ignores all carriage returns that are not
followed by line feeds.
•
Enable. The printer processes all carriage returns, even for those that are
not followed by line feeds.

Select Font

Select Font specifies which language is currently selected for use with the
ΙΓΠ/ΠΓΛ Φοντ Σετ Μενυ ον παγε 191
PGL. Refer to
selections.
for available
183