Printronix P8000 Series Administrator's Manual page 123

Format Control
Enables the printer to reflect the same spacing as earlier generation line
matrix printers after absolute and relative move commands are executed.
•
Disable (factory default). Reflects distance, generated by the VGL
feature, PGL feature, and Hex Transparent control code sequence, in the
new position (after horizontal and vertical tabs are executed).
•
Enable.
Max. Print Width
Set the maximum print width the printer will print when using an IBM host
interface. Set for 13.2 inches when printing files larger than the width of the
printer. All data exceeding the width of the maximum Printer Width will be
truncated.
•
13.2 Inches (factory default)
•
Printer Width (the maximum width of the printer)
5250 Params
123