Printronix P8000 Series Administrator's Manual page 141

Text Position
Specifies where the text will be positioned in the line space. When set to
Top-of-Line, text will be positioned at the top of the line space. When set to
Bottom-of-Line, the text will be positioned as if it were at the bottom of a 6 lpi
line space. The following example shows both Top-of-Line and Bottom-of-Line
text positions:
Dot
Row
Top of Linespace
1
2
3
4
5
6
7
8
Bottom of 8 LPI Linespace
9
10
11
Bottom of 6 LPI Linespace 12
Text Position
Text Position
Top-of-Line
Top of Line
ASCII Compatible
Allows you to specify ASCII characters print position alignment. This option
affects device font characters only, and does not affect graphics or barcodes.
•
Disable (factory default). The ASCII characters print position aligns
(horizontally) with Indian characters.
•
Enable. The ASCII characters print position shifts up to align
(horizontally) with standard ASCII characters.
If Indian character sets, such as Hindi, Kannada, Gujarati or Tamil are
selected, the menu will automatically switch to Disable. Enable will not be
available for selection until non-Indian character sets are selected.
If the "Tall ASCII Font" option is available, the menu automatically switches to
Disable. Enable will not be available for selection until the Tall ASCII Font is
disabled.
Compressed Mode (H-Series)
This parameter allows you to specify the appearance of ASCII/DBCS
characters in ASCII mode. It is not applicable for the H-Series Hangul printer.
•
Disable (factory default)
•
Enable. Prints out ASCII mode ASCII characters and half-width DBCS
characters.
Page Format Submenu (H-Series)
1
Text Position
Text Position
Bottom-of-Line
Bottom of Line
141