Printronix P8000 Series Administrator's Manual page 168

Chapter 4
EMULATION Menu
CPI/LPI Select
Defines the default values for the horizontal and vertical character spacing.
The number of characters per inch can range from 10.0 through 17.1. The
number of lines per inch can range from 3.0 through 8.0.
Font Attributes
Typeface
Choose a typeface from the available options.
Prop. Spacing (Proportional Spacing)
Each printed character is contained inside a character cell. The width of the
character cell includes the character and the space around the character.
•
Disable (factory default). Each character cell is printed with the same
width. Each column in the printed text will line up.
•
Enable. The width of each character cell varies with the width of the
character. For example, [i] takes less space to print than [m]. Using
proportional fonts generally increases the readability of printed
documents, giving text a typeset appearance.
Bold Print
•
Disable (factory default). Text is printed normally.
•
Enable. Text is printed with a heavy line thickness.
Slashed Zero
This parameter allows you to print the numeral "0" with or without the slash.
This option applies to all character sets except OCR-A and OCR-B.
•
Disable (factory default). Zero is printed without a slash.
•
Enable. Zero is printed with a slash.
168