Web Page Download
NOTE: This download method requires firmware with the .prg extension
1. Make sure the printer is powered up, in ONLINE mode, and that the
2. Get the IP address from the front panel (under Network Setup in the
3. Enter the printer's IP address in your browser (e.g., http://10.224.5.21).
4. When prompted for a user name and password, enter "root" for user
5. Click "System" in the Configuration box.
6. Click the "Upgrade" button.
FILENAME.prg.
Ethernet cable is connected.
menus).
name and click OK.
Figure 1. System Configuration Upgrade
263