Appendix E
Erasing the QCMC Image
Erasing the QCMC Image
This option should only be used when a QCMC has already been stored and
when the user desires to start fresh with a new image.
To utilize this option, navigate to the menu "Erase QCMC" and press the
ENTER key.
When this option is activated, all QCMC files and configurations will be
deleted from the SD card.
While the printer is erasing the QCMC configuration, the following message
will display. Do not interrupt the process.
DO NOT PWR OFF
Erasing Files
On QCMC...
Upon successful completion of saving a flash image to the QCMC, the printer
will display a message indicating the operation is complete. The printer will
then reboot into normal operation.
368
XX%