Barcode Height - Printronix P8000 Series Administrator's Manual

Chapter 4
EMULATION Menu
Set Substitution
When this option is activated, the character set overlay in RAM is activated.
This can also be accomplished through a host command of SFCC RX. In
either case, a flag is set indicating that the substitution table is active. If the
power-up configuration has Ld Set at Pwrup and Set Substitution both
enabled, the character set overlay is automatically activated at power-up or
during a soft reset. See the LinePrinter Plus Programmer's Reference Manual
for more information.
Barcode x-offset
•
Disable (factory default)
•
Enable. Allows text to print next to a barcode when xxxx and yyyy are not
set to the origin.

Barcode Height

•
Disable (factory default)
•
Enable. If Barcode x-offset is enabled, the barcode height follows P5000
legacy barcode behavior.
Error Handling (H-Series)
This command determines the way illegal DBCS characters are processed:
•
Normal (factory default). Will ignore illegal DBCS characters.
•
As Space. Will insert two space characters (0X20, 0X20) when the data
stream contains the illegal DBCS character.
•
As Square. Will insert a black square (0xAIBD) when the data stream
contains the illegal DBCS character. This is applicable for the Hanzi Big5
build only.
146