Printer Mgmt - Printronix P8000 Series Administrator's Manual

Chapter 4
DIAGNOSTICS Menu
Software Build
Displays the part number and version of the printer firmware.
Feature File
Displays the part number of the file if one has been downloaded to the printer.
Shuttle Type
Displays the type of shuttle installed, i.e. 2000s, 1500, 1000, 500, or high
definition.
Auto Dump
•
Disable (factory default).
•
Enable. When a printer get 'E03x' type of message on the operator panel,
a dump file will be automatically created and store in flash as file
"autodbg1.dbg" or "autodbg2.dbg" in the printer file system. This file can
be uploaded to the host using the PrintNet Enterprise Suite application.
Upon receipt of this file, it should be sent to Printronix Customer Support
for review and evaluation.

Printer Mgmt

Refer to the Printer Mgmt menu on page 247.
246