Updating The Qcmc Image - Printronix P8000 Series Administrator's Manual

Updating the QCMC Image

This option should only be used when a QCMC has already been stored and
when that QCMC already contains the printer build and files on the printer. If
only some configuration settings have been altered, the menu "Update
QCMC" can be used to update the configuration settings in the image stored
on the QCMC.
To utilize this option, navigate to the menu "Update QCMC" and press the
ENTER key.
Below is a list of items that will be updated on the QCMC by the "Update
QCMC" operation:
Below is a list of items that will NOT be updated on the QCMC by the "Update
QCMC" operation:
While the printer is updating the QCMC configuration, the following message
will display. Do not interrupt the process.
Upon successful completion of saving a flash image to the QCMC, the printer
will display a message indicating the operation is complete. The printer will
then reboot into normal operation.
•
Custom configurations (1–8)
•
All variable settings from the printer's NVRAM
•
Network settings (if LAN/WLAN is installed), including IP Address
•
Printer Program File (software)
•
Feature files or CST's that have been downloaded on the printer.
•
Other user files, such as fonts, bitmaps, or graphics files downloaded
to the printer.
DO NOT PWR OFF
Saving Setup
To QCMC...
XX%
367