Printronix P8000 Series Administrator's Manual page 137

Page Format Submenu (H-Series)
Page Format
(from page 126,
127, 128, 132)
Form Form
Length Width
Abs. Length IN Abs. Width IN
11.0* inches 13.6* inches
08.5** inches (0.1-13.6)
(0.1-24) Abs. Width MM
Abs. Length MM 345.4* mm
279.4* mm (0.1-345.5)
215.9** mm Funct. of CPI
(0.1-609.6) 136* Characters
Funct. of Lines 204** Characters
66* Lines (1-272)
68** Lines
(1-192)
Printer Protocol
Select the LinePrinter+ protocol you wish to use. Refer to the LinePrinter Plus
Programmer's Reference Manual for more information with ASCII products.
For H-Series Hanzi GB, Hanzi Big5, or Kanji LP+ printers, refer to the
LQ-1600K Programmer's Reference Manual for details. For the H-Series
Hangul LP+ printer, refer to the KS or KSSM Programmer's Reference
Manual for details.
CPI/LPI Select
This parameter lets you specify the characters per inch (cpi) and lines per
inch (lpi) values.
Host Command
This parameter allows you to block certain host commands from being
acknowledged by the printer.
•
Enable (factory default). All host commands are acknowledged by the
printer.
•
Ignore All. All host commands are ignored by the printer.
•
Ignore CPI. All CPI commands sent by the host are ignored by the
printer.
•
Ignore LPI. All LPI commands sent by the host are ignored by the printer.
•
Ignore Unidir. All Unidirectional commands sent by the host are ignored
by the printer.
•
Ignore Pg. Fmt. All page format commands sent by the host are ignored
by the printer. This is applicable for H-Series Hangul LP+ printers only.
Page Format Submenu (H-Series)
Page Format Submenu (H-Series)
* = Factory Default for Hanzi and Hangul printer
** = Factory Default for Kanji printer
Margins Perforation
Skip
Left Margin Disable*
0* columns 1/2 inch
(0-369) 2/3 inch
Right Margin 5/6 inch
0* columns 1 inch
(0-369)
Bottom Margin
0* lines
(0-451)
137