Printing By Specifying The Font To Use - Printronix LP654C User Manual

For macOS
1
Open the file to be printed.
2
Select [Print] from the [File] menu.
3
Select the [Print Options] panel.
4
Check [Adjust ultra fine lines] in the [Quality1] tab.
5
Specify other settings as necessary, and click [Print].
 If there is no detail settings displayed in the [Print] screen, click [Show details] at the bottom of the screen.

Printing by specifying the font to use

Using printer-specific fonts
 The printer fonts may not be reproduced as the TrueType font design displayed on screen.
 This function is not available to the Windows PCL printer driver when [Print Mode] is set as [Image], nor to a macOS.
 This function is not applicable to some applications.
For Windows PCL printer driver
1
Open the file to be printed.
2
Select [Print] from the [File] menu.
3
Click [Preferences].
4
Select the [Extend] tab.
5
Click [Font].
6
Check [Font Substitution] in [TrueType Font Output Type].
7
Specify the printer font to be used instead of the TrueType font in [Font Substitution Table].
8
Click [OK].
9
Specify other settings as necessary, and click [OK].
10
Click [Print] in the [Print] screen.
For Windows PS printer driver
1
Open the "Devices and Printer".
How to open the printer folder
2
Right-click on the icon of [PRINTRONIX LP654C PS], and select [Printer Properties].
3
Double-click on [Font Substitution Table] in the [Device settings] tab.
4
Click the TrueType font, and select the substitution printer font from the list.
5
Click [OK].
6
Open the file to be printed.
7
Select [Print] from the [File] menu.
8
Click [Preferences].
- 177 -