Loading A File; Deleting A File From The User C-Card; Refreshing The User C-Card - Standard Horizon CP300I Owner's Manual

2. Press [MENU]. Move the ShuttlePoint knob to highlight USER POINTS and press
[ENT]
.
3. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT]
4. A screen will appear. Move the ShuttlePoint knob to the left to highlight SAVE and
press [ENT].
5. A popup SAVE FILE window will appear. In this window you can change the name
and the file type by using the ShuttlePoint knob and pressing [ENT], when finished
press [CLR] once.
6. To save the file to the User C-CARD.

11.0.2 Loading a file

If you have a problem and accidentally loose the User Points in the GPS
with the optional User C-CARD it is possible to load the data back into the GPS
using the following procedure:
Plotter
1. Press [MENU]. Move the ShuttlePoint knob to highlight USER POINTS and press
[ENT]
.
2. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT]
3. Select the saved file from the USER C-CARD list by using the ShuttlePoint knob
and press [ENT].
4. Move the ShuttlePoint knob to the left to highlight LOAD and press [ENT].
5. A popup information window will appear when loading is complete.
6. Press [ENT] to confirm.

11.0.3 Deleting a file from the User C-CARD

You may want to delete a saved file on the User C-CARD.
1. Press [MENU]. Move the ShuttlePoint knob to highlight USER POINTS and press
[ENT]
.
2. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT]
3. Select the saved file from the User C-CARD list by using the ShuttlePoint knob and
press [ENT].
4. Move the ShuttlePoint knob to the left to highlight DELETE and press [ENT].
5. A popup Warning window will to confirm you want to delete the file.
6. Press [ENT] to confirm.

11.0.4 Refreshing the User C-CARD

You may want to change the User C-CARD inserted in the slot with a new one.
1. Press [MENU]. Move the ShuttlePoint knob to highlight USER POINTS and press
[ENT]
.
2. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENT].
3. Open the door, remove the User C-CARD from the slot and insert another User
C-CARD into the same slot.
4. Move the ShuttlePoint knob to highlight REFRESH and press [ENT]. This "new"
User C-CARD is now
Page 66
ready to receive and store information.
.
Chart Plotter
Chart
.
.
GPS Chart Plotters