User C-Card; User C-Card Menu; Formatting The User C-Card - Standard Horizon CP1000C Owner's Manual

9.

USER C-CARD

The Optional C-MAP User C-CARD is used to back up Marks, Routes, and Tracks stored
in your chartplotters memory. The User C-CARD is similar to a back up disk used with a PC,
in case you have to clear your chartplotters memory, or if you would like to transfer waypoint,
Track and route information from one Standard Horizon chartplotter to another.
9.0

USER C-CARD MENU

C-MAP offers a special card that may be used to backup the User Points and Tracks the
you have created in the chartplotter. This optional card is similar to using a floppy disc on
a PC to backup your files or to transfer the information that you have stored to a friends
chartplotter. The information shown below will assist you to transfer the User Points, Routes
and Track history to the optional User C-CARD.
1
Time of file creation
2
Date of file creation
Type of data contained in the
3
file (Mark file, Waypoint file...)
4
Number of selected Slot
5
File name
6
Number of Selected file
Information on stored User
7
Points on Internal Memory

9.0.0 Formatting the User C-CARD

1. Press [MENU], move the ShuttlePoint knob to highlight USER POINTS and press
[ENTER].
2. Move the ShuttlePoint knob to highlight USER C-CARD and press [ENTER].
3. Select FORMAT and press [ENTER].
4.
A popup Warning window will to confirm you want to format the User C-CARD.
3. Select
YES and press [ENTER] to confirm (select NO otherwise). The format of User
C-CARD must be done before using a new User C-CARD: this operation prepares the
User C-CARD to receive and store information.
Formatting permanently erases all files previously saved on the User C-CARD.
GPS chartplotters
4
SLOT
1
5
FILE
1
6
MRKS
2
WPTS
5
7
RTES
1
TRKS
566
SAVE
Figure 3.12 - User C-CARD Menu
NOTE
LOAD DELETE FORMAT
1
2
3
CHANGE
Page 53