Creating/Modifying A Mark In User Points List - Standard Horizon CPN700i Owner's Manual

2.6.6

CREATING/MODIFYING A MARK IN USER POINTS LIST

This function is very useful if you have a list of Marks that you want to enter into the CPN Series Chart
Plotter.
1. Press the
2. Tap on MARKS. The Marks/Waypoints List page will be shown.
3. To create a New Mark, tap on
4. Tap on
5. Press the rotary knob
1 It is possible to use the
Enter item (see Par. 2.1.4 "Settings in General Setup Menu") is set to On, so pressing the
knob in the center is equal to confirm action.
6. Tap on the desired Mark Icon (see C). The Mark Icons window disappears.
7. Turn the rotary knob to the right to select the Mark Name field and press the
Knob. The touchscreen keyboard appears. Insert the desired name (see D); when
finishd tap on
8. Turn the rotary knob to the right to select the Latitude/Longitude field and press the
rotary knob. Again the touchscreen keyboard appears. Insert the desired coorinates;
when finished tap on
9. Turn the rotary knob to the right to select the Mod field and press the
10. You can choose among SHOW to show on the chart the name and icon of Mark, ICON
to show on the chart only the icon of Mark or HIDE to hide on th Chart page the created
Mark. Tap on the desired modeto show the Mark.
11. Press the
12. Press the
After entering in a Mark it is a god practice to backup the points to a SD CARD.
Page 64
key, tap on User Points.
. The Mark Icon appears selected (see B).
1 . The Mark Icons popup window appears.
ShuttlePoint knob in place of the
, the keyboard disappears.
, the keyboard disappears.
key to save the created Mark.
key again and the new Mark appears on the Chart page (see E).
. A row is added (see A).
rotary knob. Make sure that the ShuttlePoint
ShuttlePoint
Rotary
rotary knob.
Owner's Manual