Technical Tests; System Test; Ram Menu (Reset); Ram Clear - Standard Horizon CPN700i Owner's Manual

9 - TECHNICAL TESTS

9.1 SYSTEM TEST

If you have connected your CPN Series Chart Plotter according to the instructions, and chosen
the proper menu selection for your device, and are still having problems with your CPN Series
Chart Plotter, the extended auto-test should help determine the problem. To enter the System
Test it is needed to hold down any key while the Chart Plotter application is starting:
1. Select the Startup Screen page.
2. Tap on the Plotter Icon
is shown, press and hold the
go of the
Choose the test and tap on it. To exit from the System Test choose EXIT option.
9.1.1

RAM MENU (RESET)

After performing a RAM Clear all Marks, Routes, Tracks and C-Weather data will be erased.

RAM Clear

All the internal memory can be erased and the default setting restored. If the CPN Series
Chart Plotter exhibits unusual operations, or appears to be malfunctioning, it may be
possible to correct the problem by clearing RAM.
This operation will erase all Marks, Routes, stored Track plots, Destinations and C-Weather
data. It will also return all selections (Input Data Format, Autopilot selection, etc.) to original
default values. To confirm clear RAM press the
do not wish to clear RAM press the
CPN700i and CPN1010i Multimedia Chart Plotters
, when the STANDARD HORIZON Splash Screen page
key. A new menu will appear on the display:
key until the System Test display is shown, then let
ShuttlePoint knob (but if at this time you
key).
Page 171