Table of Contents
Advertisement
CAMERA AND MONITOR SETUP
4-30
g.
7.
Press 4 to select a monitor to setup.
Type the monitor number (1-32) and press Enter.
8.
Press 5 to position the date/time and camera title displays on the
monitor. The current position is displayed. Use the gray arrow keys on
the keyboard to move the display to the desired location on the monitor.
Note: the video alarm display appears on the selected monitor two
lines above the camera title. Press Esc when in the desired position.
9.
Press 6 to enable (Y) or disable (N) the time/date display on the monitor.
Pressing 6 toggles between Y and N.
10. Press 7 to enable (Y) or disable (N) the camera title display on the
monitor. Pressing 7 toggles between Y and N.
11. When done programming the camera titles and the monitor display,
press Esc to exit the CAMERA/MONITOR OPTIONS menu.
12. Choose another option or Press Esc to end programming
Press 7 to assign a MultiCall to a loss of sync alarm.
Enter the MultiCall number (000-255) and press Enter. The
default MultiCall is 000.
Advertisement
Table of Contents
