Appendix C. Model Ccu-100/Hd Quick Reference Guide - Ultrak CCU-100HD User Manual

APPENDIX C. MODEL CCU-100/HD QUICK REFERENCE GUIDE

CCU -100/HD OR CCU-100/HD/X CENTRAL CONTROL UNIT
WITH JPD-100 CONTROLLER AND KBD-100A KEYBOARD
All function keys (F1 through F12) and shifted function keys referred to in this guide are
located on the KBD-100A Keyboard. The shifted function keys are activated by holding
down the "Shift Key" and the function key (F1 through F12) at the same time.
The commands in the following procedures are separated by the '>' symbol. This
symbol is not to be typed on the keyboard.
FUNCTION
On-Screen Help/
Repaint Screen
Esc
Program MultiCall
(Numbered 0-255)
DEFINITION
Provides brief description of
Functions F1 through F12
& Shifted Function Keys F5
through F12 for
programming the CCU.
Exit Programming
File stored in CCU-100
containing one or more
functions of a
FastScan/SmartScan
system that are performed
at the same time or one
function at a time with
programmable dwell times
between each function.
MultiCalls can be assigned
to:
Alarm Inputs
JPD-100 Function Keys
SHB-100 Function Keys
Started by Date and Time
PROCEDURE
Press F12 Once – Diamond
copyright
Press F12 Second Time -
Function Key Menu
Press F12 Third Time - Shifted
Function Key Menu
Press F12 Fourth Time - clears
screen
The "Esc" key causes the unit to
back up one step in the
programming mode and
eventually returns the dome to
manual control.
Shift+F11>MultiCall Title>Enter>
Up to 31 Functions> Enter>S
(Save)
Functions:
P = PreShot
V = VectorScan
M = MultiCall
C = Video Switcher Call, Call
Camera to Alarm Monitor, Call
Camera to Alarm VCR,
Automatically Acknowledge
Alarm
A = Auxiliary Output Control
C-1