ASSIGNING MULTICALLS
4-24
4.3.11
Assigning MultiCalls to Date and Time
A MultiCall can be assigned to Date and Time. When the clock in the CCU
reaches the programmed time, the CCU starts the MultiCall. The CCU can
be programmed to repeat the same MultiCall at specific intervals. Up to nine
MultiCalls can be assigned to date and time.
To assign MultiCalls to date and time, perform the following steps.
1.
Press Shift F10.
2.
Press T for time initiated MultiCall.
To program a MultiCall to run once at a specific time, leave the interval
fields blank or enter zeros in the interval fields. Use the space bar on
the keyboard to space across inserting blanks or enter 0s in the spaces.
If a MultiCall is programmed to only run one time, after it has been
started and run, the CCU automatically deletes that MultiCall from the
listing.
MC
•••
EXAMPLE
To run MultiCall #5 on 12/23 of the current year at 3:00 PM and then
every 3 days plus 4 hours, enter the following data.
MC
05
Start
Interval
Date-Time
Day-Time
.. / .. - .. : ..
.. - .. : ..
Start
Interval
Date-Time
Day-Time
12/23-15:00
03-04:00