Table of Contents
Advertisement
inputs that do not have video connected to them. False loss of sync
alarms will be generated on video inputs with no video.
a.
Press 1 to enable or disable the video alarm for each video input.
The first 32 video inputs are displayed. The default for each video
input is N (disabled). Enter a Y beside the video input number to
enable its video alarm. Enter a N beside the video input number to
disable its video alarm. Use the gray page up and page down keys
or the gray arrow keys to view more video inputs and position the
cursor in the desired field.
b.
Press 2 to enable or disable a range of alarms.
1.
Enter the first alarm number and press Enter.
2.
Enter the last alarm number and press Enter.
3.
Enter 1 to enable the range of alarms or 0 to disable the
range of alarms.
c.
Press 3 to program the switcher Integration Time (0-30 seconds).
The default time is 5 seconds.
Enter the time and press Enter.
d.
Press 4 to program the video alarm display monitor (1-32). The
oldest video alarm message is displayed on the selected monitor.
Refer to Section 3 of this manual for operation of the video alarms.
Enter the monitor number (1-32) and press Enter.
e.
Press 5 to assign a MultiCall to a low video alarm.
Enter the MultiCall number (000-255) and press Enter. The
default MultiCall is 000.
f.
Press 6 to assign a MultiCall to a high video alarm.
Enter the MultiCall number (000-255) and press Enter. The
default MultiCall is 000.
CAMERA AND MONITOR SETUP
4-29
Advertisement
Table of Contents
