Ultrak CCU-100HD User Manual page 104

SAMPLE SYSTEM PROGRAMMING
4-36
d.
e.
3. Program PreShot 1 on Camera #2 to view the entrance door.
a.
b.
Enter 1 for Alarm VCR control output. The CCU-100 automatically
enters a 1 for the last Alarm VCR control output because there is
only one Alarm VCR video output programmed.
The screen should appear as follows:
FIRST - 01
ALARM VCR VIDEO OUTPUTS
FIRST - 02
ALARM VCR CNTRL OUTPUTS
FIRST - 01
Press Enter when done to save.
Call up Camera 2 on Monitor 1 on the programming JPD-100
Controller.
2 CNT
1 MON
Move the joystick (pan, tilt, zoom) so camera #2 is viewing the
desired location at the front entrance and adjust the focus.
ALARM SETUP
ALARM MONITORS
LAST - 01
LAST - 02
LAST - 01
(Control Camera 2)
CNT (Control Monitor 1)