Ultrak CCU-100HD User Manual page 54

3-4
2.
If an operator calls a control camera displayed on one of the
other JPD-100s in the system; the operator gets control of the
camera. The other controller's display still shows it as the
control camera; but loses manual control. To regain control of
the camera displayed on the JPD-100, press the CNTL key on
the JPD-100 keypad.
Alarm Display
If an AIU-100 Alarm Interface Unit or a host computer is
installed in the system, the oldest alarm number (A###) from
these devices is displayed on the second line of the JPD-100
LCD display. When the displayed alarm is acknowledged, the
next oldest alarm appears on the display.
CNTL - CAM 3 MON 4
A###
If the video alarms monitored by the HD switcher are enabled,
the oldest video alarm (V###) from the switcher is displayed on
the second line of the JPD-100 LCD display.
displayed alarm is acknowledged, the next oldest alarm
appears on the display.
CNTL - CAM 3 MON 4
V###
The standard alarms and the video alarms can be
acknowledged individually or all standard or video alarms can
be acknowledged at the JPD-100 Controller. Refer to the JPD-
100 Joystick Controller User's Manual for the procedures to
acknowledge alarms.
acknowledged in the MultiCall assigned to the alarm.
An alarm can be automatically
When the