Table of Contents
Advertisement
FUNCTION
Programming Alarm
Inputs
Call-Up Video From
Alarm Inputs On
Alarm Monitor
DEFINITION
Up to 255 alarms can be
programmed
Program MultiCall to call-up
video from alarm inputs to
alarm monitors (placing
following alarms in a
queue)
PROCEDURE
1. Program a MultiCall for the
alarm input. See Call-Up
Video From Alarm Inputs on
Alarm Monitor and Alarm VCR
to program MultiCall to call up
video from alarm input to
alarm monitor and/or alarm
VCR (placing following alarms
in queue).
2. Assign MultiCall to Alarm
Input:
Note: A MultiCall can be assigned to
more than one alarm.
Shift+F10>A>Alarm
#>enter MultiCall # to right
of alarm # in MC
column>Enter
3. Continue entering Alarm # 's
and assigning MultiCalls until
done.
4. Press Esc to end
programming.
Call-up Video to Alarm Monitor
as the first function in the
MultiCall assigned to the alarm.
FUN NUM CAM MISC DWELL
C
AM
Cam #
Note: All steps before the Alarm
Monitor Call must have a 00 dwell time.
C-5
0-99 secs.
Advertisement
Table of Contents
