Setting The Date And Time In The Ccu-100/Hd Central Control Unit - Ultrak CCU-100HD User Manual

SETTING DATE AND TIME
4-26
4.3.12

Setting the Date and Time in the CCU-100/HD Central Control Unit

To set the date and time on the clock in the CCU, perform the following
steps.
1. Press Shift F10.
2. Press S on the KBD-100A keyboard.
3. Enter the date and time.
Month = 1-12
Day = 1-31
Year = last two digits of year
Hour = 1-24
Minute = 0-59
Second = 0-59
The system only accepts correct dates (including leap year) and times.
If an incorrect date and/or time is entered, the cursor moves to the
incorrect block for correct data to be re-entered.
4. Press Enter.
Note: The time is set at the instant the user presses ENTER.
If the Ultrak HD switcher is programmed to display the date and time,
the new setting appears on the monitor when the CCU sends the update
to the switcher. The CCU sends the date and time to the switcher every
minute.