Dip Switch (S5) For Jpd Selection - Ultrak CCU-100HD User Manual

2-4
DIP switches S1 - S3 are be set for 9600 baud, even parity as follows:
DIP Switch S1 – S3
Switch Position
DIP switch S4 is set as follows. COM2 requires a 19.2K baud rate for
communication to the Ultrak HD Series Video Switcher.
Switch Position
2.2.1.2

DIP Switch (S5) for JPD Selection

DIP switch S5, position 2, is used to define the firmware revision level of
the JPD-100 Controllers in the system and must be set to the ON
position. All other switch positions should be set in the off position.
OFF
ON
1
2
3
4
5
6
7
8
DIP Switch S4
1
2
3
4
5
6
7
8
JPD-100 Revision C or earlier (16 monitors)
JPD-100 Revision D or later (32 monitors)
ON/OFF
ON
OFF
ON
ON
OFF
ON
ON
ON
ON/OFF
OFF
OFF
ON
ON
OFF
ON
ON
ON
DIP SWITCH S5-2