Ultrak CCU-100HD User Manual page 76

PROGRAMMING MULTICALLS
4-8
5. When done entering functions, press ENTER .
6. Press S to Save the MultiCall or D to Delete the MultiCall entirely. If you
want to add functions between existing steps, change any of the existing
functions, or change any of the fields for a function, press E to Edit.
If E to Edit was selected, use the gray arrow keys to move to the desired
field on the screen. To go to the beginning of a line, press the gray
Home key. To go to the end of a line, press the gray End key. To insert
a function between steps, use the gray Insert key to insert a line above
the line the cursor is on. To delete a function, position the cursor on the
line you want to delete and press the gray Delete key.
The following paragraphs describe the steps to program each function
programmable in a MultiCall. Steps 1 through 3 above must be done
before programming a function.