Assigning Multicalls To Aif-100/Al And Aif-100/Io Alarm Inputs - Ultrak CCU-100HD User Manual

B.3.1

Assigning MultiCalls to AIF-100/AL and AIF-100/IO Alarm Inputs

Perform the following steps to program the alarm inputs.
1. Press Shift F10 on the KBD-100 keyboard.
The following screen appears.
PROGRAM RESPONSE TO:
C > Camera/Monitor Setup
A > Alarms
J > JPD-100 JPD Quick Sw
Q > SHB-100 Shot Box Q Sw
T > Time Initiated MCall
S > Set Date and Time
L > Alarm Configuration
2. Press A
The following display appears on the screen.
3. Enter the alarm number to be assigned to a MultiCall and press Enter.
There are a total of 255 alarm inputs.
depends on the alarm number entered.
PROGRAM ALARM RESPONSE
PROGRAM ALARM...
The screen that appears
B-9