Table of Contents
Advertisement
1.
Read Instructions - All the safety and operating instructions should be read before the unit is
operated.
2.
Retain Instructions - The safety and operating instructions should be retained for future reference.
3.
Heed Warnings - All warnings on the unit and in the operating instructions should be adhered to.
4.
Follow Instructions - All operating and use instructions should be followed.
5.
Cleaning - Unplug the unit from the outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning. See cleaning procedures under Maintenance.
6.
Attachments - Do not use attachments not recommended by the product manufacturer as they
may cause hazards.
7.
Water and Moisture - Do not use this unit near water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet basement, near a swimming pool, in an unprotected outdoor
installation, or any area which is classified as a wet location.
8.
Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit may
fall, causing serious injury to a person and serious damage to the unit. Use only with a stand,
tripod, bracket, or mount recommended by the manufacturer, or sold with the product. Any
mounting of the unit should follow the manufacturer's instructions, and should use a mounting
accessory recommended by the manufacturer.
A cart should be moved with care. Quick stops, excessive force, and uneven surfaces may cause
the cart to overturn.
9.
Ventilation - Openings in the enclosure, if any, are provided for ventilation and to ensure reliable
operation of the unit and to protect it from overheating. These openings must not be blocked or
covered. This unit should not be placed in a built-in installation unless proper ventilation is
provided or the manufacturer's instructions have been adhered to.
10.
Power Sources - This unit should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply you plan to use consult your dealer
or local power company. For units intended to operate from battery power, or other sources, refer
to the operating instructions.
11.
Grounding or Polarization - This unit may be equipped with a polarized alternating-current line
plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
Alternately, this unit may be equipped with a 3-wire grounding-type plug, a plug having a third
(grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the grounding-type plug.
12.
Power-Cord Protection - Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying particular attention to cords
and plugs, convenience receptacles, and the point where they exit from the equipment.
IMPORTANT SAFEGUARDS
Advertisement
Table of Contents
