The following display appears on the screen.
PROGRAM RESPONSE TO:
C > Camera/Monitor Setup
A > Alarms
J > JPD-100 JPD Quick Sw
Q > SHB-100 Shot Box Q Sw
T > Time Initiated MCall
S > Set Date and Time
L > Alarm Configuration
2.
Press A
The following display appears on the screen.
PROGRAM ALARM RESPONSE
PROGRAM ALARM...
3.
Enter the alarm number to be assigned to a MultiCall and press Enter.
There are a total of 255 alarm inputs.
depends on the alarm number entered.
The alarm number entered is the first number appearing in the upper
left corner of the screen. Thirty alarm numbers appear on the screen at
a time.
The screen that appears
B-3