Table of Contents
Advertisement
5.1
GENERAL
This section contains the information on preventive maintenance and
troubleshooting at a user's level for the Central Control Unit.
5.2
MAINTENANCE PROCEDURES
a.
Preventive Maintenance
Use of preventive maintenance allows detection and correction of minor
faults before they become serious enough to cause equipment failure. As
a result, major repairs can be avoided, and the equipment can be
maintained in an operable condition with a minimum of maintenance.
Every 3 months, perform the following.
1.
Inspect all interface connecting cabling for deterioration or other
damage.
2.
Clean the front panel with a soft cloth using any mild commercial
cleaner.
b.
Troubleshooting
If problems occur at the initial installation phase, they are probably due to
improper installation/set-up. Verify that the procedures in Section 2 have
been performed correctly. Because this unit is just one part of an overall
system, it may be necessary to verify that the other equipment types have
been installed and are operating correctly before assuming the problem
exists at the Central Control Unit.
SECTION 5. MAINTENANCE
5-1
Advertisement
Table of Contents
