Ultrak CCU-100HD User Manual page 82

PROGRAMMING MULTICALLS
4-14
C - Call (Alarm Monitor or Alarm VCR)
The AM and AR functions must be the first steps in the MultiCall. The
first step, if both alarm monitor and alarm VCR are used, must contain a
dwell time of 00 so the MultiCall processes the alarm monitor call and
the alarm VCR call at the same time. If the video is only to be called to
an alarm monitor or an alarm VCR, the dwell time can be from 00 to 99
seconds before performing the next step in the MultiCall.
To call a camera to an Alarm Monitor or Alarm VCR, perform the
following steps. If both functions are programmed, they should be
entered in line 00 and line 01 of the MultiCall. If only one of the
functions is programmed, it should be entered in line 00 of the MultiCall.
1.
2.
3.
4.
Enter C in the FUN field.
Enter AM in the NUM field to call the camera to an Alarm Monitor
or AR in the NUM field to call the camera to an Alarm VCR.
Enter the camera number (1-128) for the alarm video in the
CAM field.
Enter a dwell time in the DWELL field.
Dwell time is the amount of time you want the CCU to wait before it
performs the next step in the MultiCall. A "00" dwell time tells the
CCU to perform the functions at the same time. A "15" second
dwell time means that the CCU will wait 15 seconds before
performing the next step in the MultiCall.
If an alarm is to be automatically acknowledged (AA), the dwell
time for the Alarm Record (AR) or Alarm Monitor (AM) (whichever
occurs last) should reflect the amount of time the user wishes to