Table of Contents
Advertisement
C-6
FUNCTION
Call-Up Video From
Alarm Inputs On
Alarm VCR
Automatically
Acknowledge Alarms
Programming
JPD-100 Function
Keys
DEFINITION
Program MultiCall to call-up
video from alarm inputs to
alarm VCR (placing
following alarms in queue)
Program MultiCall to
Automatically Acknowledge
Alarm
Up to four JPD-100s (0-3)
0 = Front Panel
1 = Channel 1
2 = Channel 2
3 = Channel 3
PROCEDURE
Call-up Video to Alarm VCR as
the first function in the MultiCall
assigned to the alarm. It can be
the second function if calling up
video to alarm monitor.
FUN NUM CAM MISC DWELL
C
AR
Cam #
Note: All steps before the Alarm VCR
Call must have a 00 dwell time.
At end of MultiCall assigned to
alarm, perform a Video Switcher
Call to automatically
acknowledge alarm.
FUN NUM CAM MISC DWELL
C
AA
1.
Program MultiCall for each
key.
2.
Assign MultiCall to Function
Key:
Shift+F10>J>JPD# (0-3)>
Enter
Use arrow keys to move to
the desired function key #>
Type MultiCall # in MC
column to right of function
key #>Enter
3.
Program another JPD or
press Esc to end
programming.
0-99 secs.
0-99 secs.
Advertisement
Table of Contents
