Ultrak CCU-100HD User Manual page 108

SAMPLE SYSTEM PROGRAMMING
4-40
Perform the following steps to program the system to respond as required
above.
1. Outline your system.
Receiving Dock Camera = Camera #6
Monitor on Supervisor's Desk = Video Output (Monitor) #2
VCR = Video Output #3 and Auxiliary Contact Output #1 on AIF-100/CO
addressed 2
Alarm = AIU Address 0, Contact Input 5 = Alarm #5
2. Program PreShot 4 on Camera 6 to view the receiving dock.
a.
b.
c.
d.
e.
f.
Call up camera 6 on monitor 2 on the programming JPD-100.
6 ENT
2 MON CNT
Move the joystick (pan, tilt, zoom) so camera #6 is viewing the
desired location at the truck entrance and adjust the focus.
Press Shift F5 on the KBD-100A keyboard.
Type 4 for the PreShot number and press Enter.
Type the title of the PreShot (up to 16 characters)
Truck Gate
Press Enter
Press S to save the present view on the monitor and the title.